PURE M3700 Bedienungsanleitung PDF herunterladen (Seite 39)

M3700 user manual

Dial Inbound Transit Call when Auto Answer is configured as Enable w/ PIN code

This Auto Answer mode provides security control for the Inbound Transit call

Please dial the number below after the second dial tone:

1. PIN code + ‘#’+ SIP Number + ‘#’, Example: 7742#73797# or

2. PIN code + ‘#’+ ‘#’ + Index Number + ‘#’, Example: 7742##123#

If you still need to make a call to the FXS port of this gateway, please press "*" to seize a free FXS

port.

Notice for the Inbound Transit Call

1. If the SIP number that user dial does not match any prefix code configured in Dialing Plan page,

the call is disconnected.

2. If the PIN Code does not match any passwords configured in Password For Inbound Transit

page, the call is terminated.

3. If the Index Number does not match any pre-configured Phonebook Index in Phone Book page,

the Index Number will be regarded as SIP number and create a IP call without applying any

match rule configured in Dialing Plan.

For which free FXS port that this gateway will seize, please refer to

8.5 Non-SIP Call port seizure

preference

The PIN code (Password for Inbound Transit) is configured at chapter 9.9 INBOUND TRANSIT

The Dialing Plan is configured at chapter

8.1.1.1 Dialing Plan

The Index Number is configured at chapter 9.12 PHONE BOOK

7.10 Make SIP IP Call without SIP Proxy

The main purpose of Contact Address is making SIP calls without proxy.

The Contact Address is the same as the "Username" of Public Address if that field is configured. For

S/W version above 1.05, the value is read only. Generally speaking, "Username" of Default Account

are digits and it is regarded as SIP number.

WEB Page: ADVANCED\SIP COMMOM

DCC NO. 91710015011

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Keine Kommentare

PURE M3700 Bedienungsanleitung Seite 39