PURE M3700 Bedienungsanleitung Seite 45

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 92
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 44
M3700 user manual
If Auto Answer function is enabled, Incoming PSTN call dials "*" to seize a free FXS port after
second dial tone. The call is not forwarded even the seized FXS port is part of Call Forward
SIP Entity.
If Auto Answer function is set to Forward to SIP, Incoming PSTN call is forward to new
destination configured in the entity that this channel belongs to.
Configuration
WEB page: ADVANCED\SIP COMMOM
Phone Set: Please refer to section Appendix A: Phone-Set Command.
8.3 Inbound Authentication
You need to configure inbound authentication if you request authentication for other SIP phone to
call you.
Configuration
WEB Page: ADVANCED \ SIP INBOUND AUTHENTICATION
8.4 FAX
For M3700 software version 1.05 or above, SIP-based T.38 Fax protocol is applied. Any brand SIP
gateway with SIP-based T.38 Fax protocol may transmit FAX with each other. T.38 is FAX protocol
and it has better performance and better successful transmission rate. However, SIP device that
does not support SIP-based T.38 still can transmit and receive FAX with M3700 by G.711 codec.
G.711 codec uses more bandwidth, so it may not as good as SIP-based T.38 protocol if bandwidth
control is the key factor of the network.
Setup method is listed below:
43
DCC NO. 91710015011
Seitenansicht 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare