PURE M3700 Bedienungsanleitung PDF herunterladen (Seite 38)

7.9 Make Inbound Transit Call

To make an inbound transit call from PSTN to SIP, you have to enable Auto Answer function of this

gateway

Please enable Auto Answer configuration at

WEB Page: CHANNEL

WEB Page: ADVANCED\GENERAL

Notice: If you do not want to dial “#” after numbers, please configure the ‘Dial Ending

Time’ item. After the seconds configured here, the call will be sent automatically.

If you don't enable the Auto Answer configuration, the inbound call from PSTN will be assigned to a

free FXS port of this gateway directly. It makes Inbound Transit Call impossible.

When Auto Answer function is enabled, the gateway will answer the call and calling side will hear

the second dial tone. For the Auto Answer function, it is also divided into Enable and Enable w/

Pincode options. The configuration page is the same as above.

Dial Inbound Transit Call when Auto Answer is configured as Enable

Please dial the number below after the second dial tone:

1. SIP Number + ‘#’, Example: 73797# or

2. ‘#’ + Index Number + ‘#’, Example: #123#

If you still need to make a call to the FXS port of this gateway, please press "*" to seize a free FXS

port.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 91 92

Keine Kommentare

PURE M3700 Bedienungsanleitung Seite 38