PURE M3700 Bedienungsanleitung PDF herunterladen (Seite 47)

M3700 user manual

VOICE port Select VOICE port only From the lowest port number

upward

FAX port Select FAX port only From the lowest port number

upward

2. Outbound to PSTN

For the calls from FXS to FXO, the ports of the same "Connect Device" type will be the prior

selection for the calls.

If there is no correct configured port is available, it will ignore the "Connect Device" setting and

create a call as the rule below.

From FXS port to FXO port Note

Connect Device at FXS port Connect Device at FXO port

Select VOICE port (1

priority) VOICE port

Select FAX port (2

priority)

From the highest port

number downward

Select FAX port (1

priority) FAX port

Select VOICE port (2

priority)

From the highest port

number downward

For the setting of "Connect Device", please refer to

9.11 CHANNEL

8.6 Call Waiting

Call waiting function for a FXS port to answer two SIP calls.

When D answer a SIP call from other SIP phone or gateway, such as A. In normal condition,

another incoming call dial to D will be busy, such as B to D. With Call Waiting function, the phone

call dials from B to D will not be busy. Here is the possible situation.

 D keeps talking with A and hears Call Waiting Tone if B calls D.

 B hears normal ring back tone without sense any different.

 If D keep talking with A and ignore the Call Waiting Tone for more than 30 seconds, Call

Waiting Tone stop and the phone call return to normal condition

 If D keep talking with A and ignore the Call Waiting Tone for more than 30 seconds, B keep

hearing ring back tone for 30 seconds and listen busy tone finally.

 D can talk to B if D presses Flash button when hearing the Call Waiting Tone. Phone A is silent

when D talk to B.

 D can talk to A or to B by keep pressing Flash button to switch the two side.

DCC NO. 91710015011

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 91 92

Keine Kommentare

PURE M3700 Bedienungsanleitung Seite 47