Pure Evoke Mio Deutsche Grammophon Bedienungsanleitung PDF herunterladen (Seite 19)

Help and Specifications

Secondary and inactive stations

(<</>>) Secondary digital radio services

Some stations have accompanying secondary services which provide extra

information or alternative content and may only be broadcast at certain times. If a

station has a secondary service available, the station shows ‘>>’ next to its name

in the station list and the secondary service appears next to the station in the list. A

secondary service has a ‘<<’ before its name in the station list.

(?) Inactive or unavailable digital radio stations

Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot

be tuned to. A station may be inactive or unavailable because the station is not

broadcasting at the current time (check with the station) or has stopped broadcasting

altogether. Also, you may not have a strong enough signal to receive the Multiplex on

which the station is broadcast.

Hints and tips

Display says ‘No stations available’

Use Autotune (see page 13) to search for stations. Try adjusting your aerial or radio

position.

Receiving new digital radio stations that have started broadcasting

Use Autotune (see page 13) to scan and add any new digital services to the station

list.

The screen is very dark

Check that the light sensor on the front panel is not obstructed.

Using the alarm when a ChargePAK E1 is fitted

When the radio is powered by a ChargePAK E1 for portable listening, i.e., a

ChargePAK rechargeable battery is ﬁtted and the unit is not connected to mains

power, the radio switches off completely when the Standby button is pressed and

the alarm will not sound. In this case, the message ‘Disabling alarm’ will be displayed

when the Standby button is pressed.

Resetting your radio

Resetting your radio removes all presets, clears the station list and resets all options

to defaults.

1. Press and hold the Menu button for three seconds to enter the hidden menu.

Select ‘Factory reset’.

2. Push the Tune dial within 3 seconds to confirm the reset or the reset will cancel.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 111 112

Keine Kommentare

Pure Evoke Mio Deutsche Grammophon Bedienungsanleitung Seite 19