PURE Contour i1 Air Bedienungshandbuch PDF herunterladen (Seite 9)

Stage 4: Assigning Contour a unique name

If you prefer, you can change the name that your network, iTunes and Apple device sees the

Contour as. Carry out the following in the Contour Name Assignment area below to change

Contour’s name:

1. Type the name (e.g. ‘Living Room’) that you want to assign Contour in the Product Name box.

2. Click Update.

3. Wait for the conﬁrmation page to be displayed to conﬁrm that the new Product Name has been

applied to Contour.

Stage 5: Adding Contour to your wireless network

Contour will automatically scan for available networks. If the automatic option does not work, see

“Manual wireless setup” on page 16 to manually add Contour to your wireless network:

1. Select the name of your own wireless network from the Network drop-down list. The

encryption method will automatically be detected by Contour.

2. If required, enter the security key used by your network in the box below.

3. Click Connect. The Status LED will then ﬂash red to indicate that Contour is resetting. When

Contour has reset it will enter Sleep mode and the Status LED will be dim red.

4. Press Standby on Contour or the remote control so that AirPlay is selected as the input

source. If the Status LED is steady white AirPlay has been setup successfully. If the Status

LED is ﬂashing white there is a problem with Contour’s network connection. See “Hints and

tips” on page 24 for more information.

5. Contour is now setup to use AirPlay with a wireless connection. See page 11.

Note: We recommend that you contact your IT department before attempting to connect Contour

to a corporate wireless network.

Contour Name

Assignment

Wireless Network

Settings

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Keine Kommentare

PURE Contour i1 Air Bedienungshandbuch Seite 9