PURE Contour i1 Air Bedienungshandbuch PDF herunterladen (Seite 16)

Connection

The Connection tab is divided into two main sections, Contour Name Assignment and Wireless

Setup.

1. Select ‘Conﬁgure Manually’ from the Network drop-down list and select the encryption

type of your wireless network from the drop-down list below. Contour supports the following

encryption types:

• No Encryption Select this option if your wireless network is unsecured.

• WEP Select this option if your wireless network is being secured using the

Wired Equivalent Privacy (WEP) method.

• WPA Select this option if your wireless network is being secured using the

Wi-Fi Protected Access (WPA) method.

• WPA2 Select this option if your wireless network is being secured using the

Wi-Fi Protected Access II (WPA2) method.

Note: Please check your wireless router conﬁguration to ﬁnd out the type of encryption that

is being used on your wireless network.

2. Enter the passphrase/key needed to connect to your network in the box below, if one is

required.

3. Click Connect. The Status LED will then ﬂash red to indicate that Contour is resetting. When

Contour has started up it will enter Sleep mode.

Contour Name

Assignment

Wireless Setup

Contour name assignment

See page 9 for more information on how to assign a unique name for Contour.

Automatic wireless setup

See page 9 for information on automatic wireless setup.

Manual wireless setup

If your wireless network is not broadcasting an SSID, you will need to conﬁgure your wireless

settings manually.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

PURE Contour i1 Air Bedienungshandbuch Seite 16