Pure Highway 300Di - Installation Guide Bedienungsanleitung PDF herunterladen (Seite 9)

Fit cables and connections

1. Fit USB extension and aux in cables

Route the USB extension (used for MP3/iPod connection) and aux-in

cable form e.g. the glove box, to where you will ﬁt the main unit, as

required. Note that even if this cable is not required for use with music

devices, it is recommended that it is installed to enable easy access to the

USB socket for software updates.

2. Fit connections to the head unit

Slide out the head unit and connect aux-in cable from Highway or connect

the FM pass-through cable and reroute the existing FM antenna cable and

the pass through cable to where you will ﬁt the main unit. Antenna adapters

(Fakra/ISO/DIN) or extensions may be required.

Note: If the Line out connection on Highway is used the FM transmit/pass

through is disabled.

3. Connect the power loom

Connect the supplied loom to the vehicle’s system ensuring the Highway

300Di power connector is positioned where you will ﬁt the main unit.

Note: The supplied loom provides a permanent live and ignition controlled

live feed to Highway but also offers other connections that may not be

required. Ensure any unused wires are safely taped up and securely tied.

4. Mount the controller

1. Run the cable for the controller from where you will ﬁt the main unit

to the desired mounting position e.g. on the dashboard and mount

the bracket as required - either using the supplied sticky pad, swivel

bracket or third party mounting bracket.

2. Once secure - click the controller onto the controller bracket making

sure it is securely mounted.

5. Connect all cables to the main unit

1. Connect all cables to the main unit and trial ﬁt it in place.

2. Slide the head unit back into place.

6. Check operation/setup

1. As soon as the power is connected, Highway 300Di will switch

on automatically, once it has started up it will ask you to select a

language.

2. Turn the Select knob to browse and press the knob to choose your

preferred language.

3. An autotune will be performed to scan for digital stations and Highway

will tune to a digital station when complete.

4. Switch on the head unit and select the aux-in source or FM radio

depending on ﬁtting method.

5. Check all sources/connections work.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Pure Highway 300Di - Installation Guide Bedienungsanleitung Seite 9