4
Installation checklist
Before installation
Review car and existing audio installation and discuss options with customer:
Decide on where to mount the main unit and controller:
•Check where the existing tuner is fitted (on some cars this may be in the
boot) and consider where the Highway main unit might be installed.
•Check and agree suitable locations for the USB extension cable
(recommended for all installs as used for iPod/MP3 player connection
and software updates) and optional auxiliary input (3.5 mm) cable.
•Check for auxiliary inputs on the existing audio system which might be
used by Highway
•Discuss controller placement with the customer - consider cable length to
attach to controller box and accessibility and visibility from the drivers seat.
Decide on which antenna type with the customer:
•Best – external digital antenna with grounding to vehicle bodywork (e.g.
Pure Active Through Glass Antenna).
•Good – internal digital antenna with grounding to vehicle bodywork (e.g.
Pure Active Film Antenna).
•Alternative – other antenna – magnetic roof mounted mast or factory
fitted digital antenna.
•Check that the supplied antenna cable will reach or use a suitable
antenna extension (2.5m cable available from Pure).
•Discuss controller placement with the customer - consider cable length
to attach to controller box and accessibility and visibility from the drivers
seat.
During installation
Make sure the USB extension is installed in a convenient location.
Make sure the 3.5mm auxiliary input cable is installed in a convenient location.
Adjust the FM transmit frequency if required (In Australia this should be set
to 88.6 MHz) see page 16 of the Owner’s manual.
Kommentare zu diesen Handbüchern