PURE M3700 Installationshandbuch PDF herunterladen (Seite 90)

3.2.7 Installation of 4-shelf System (Side-by-side Type)

When vertical space is limited, it is possible to install shelves side-by-side. Installing the system using base

stands (supplied with an optional Mounting Kit) makes it easy to reinstall shelves in a different place.

Construction of 4-shelf System (Side-by-side Type)

Expansion Shelf 3

Expansion Shelf 2

Metal Bracket

Support Bracket

Base Stand

Expansion Shelf 1

Wall Bracket

(Right)

Wall Bracket

(Left)

Basic Shelf

Metal Bracket

Base Stand

Support Bracket

WARNING

Be careful not to drop any components. Dropping components may damage them or cause an

injury.

CAUTION

• Do not block the openings of the shelf. Allow space of at least 10 cm (4 in) at the sides of the shelf,

and 20 cm (8 in) above the top-mounted shelf.

• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the

back of the shelf will not be blocked.

• Make sure that the surface behind the shelf is not made of wood.

Note

• Make sure to remove the front cover from each shelf before installing the shelves (refer

to "3.2.3 Opening/Closing the Front Cover").

• Do not install any optional service cards or a PSU in the shelves before installation.

• Make sure to install the shelves where the Bus Cable (supplied with a BUS-M card or BUS-ME card)

can reach the shelves.

90 Installation Manual Document Version 2009-12

3.2.7 Installation of 4-shelf System (Side-by-side Type)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 127 128

Keine Kommentare

PURE M3700 Installationshandbuch Seite 90