6 7
PUREIT ULTIMA RO + UV’S UNIqUE TECHNOLOGY
Pre-Sediment Filter
Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.
Pre-RO Carbon Filter
Removes chlorine and organic impurities like harmful pesticides. It also adsorbs bad taste
and odour-causing organic compounds from water.
Post-Carbon Sediment Filter
Removes remaining fine and coarse particulate impurities/dirt and improves the life
of RO Membrane.
RO Membrane
Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury.
It also removes microbial contaminants like bacteria, virus, protozoa and cysts.
TDS Modulator
Adds adequate quantities of essential minerals to the purified water.
UV Reactor
Acts as an additional stage of purification to further inactivate bacteria, virus
and parasites to deliver safe water.
Post-RO Carbon Filter
Last level of purification acts as a polisher and enhances the taste of purified water.
1
2
3
4
5
6
7
TECHNICAL SPECIFICATIONS OF
PUREIT ULTIMA RO + UV PURIFIER
#
Pureit Ultima RO + UV
Height ~486 mm
Width ~360 mm
Depth ~311.5 mm
Weight of ‘Pureit Ultima RO + UV’ ~9.5 kg
Flow rate* Approximately 9–12 litres per hour
Storage tank capacity 10 litres**
6-Stage Purifying Technology
PP Melt Blown Pre-Sediment Filter, Pre-RO Carbon Filter,
Post-Carbon Sediment Filter, Reverse Osmosis Membrane,
UV reactor and Post-RO Carbon Filter
Membrane type Thin-film composite spiral wound
Pump type Diaphragm pump, 24V DC
% Recovery* Typically 25%
TDS reduction*** 90% (min)
Input water pH range 6.5–8.5
Power rating 60 Watts
Pressure rating 5–30 PSI****
Input Voltage 150–300 VAC, 50–60 Hz
Material of construction for plastic parts Food grade, non-toxic, engineering grade plastics
Length of Power cord 1.6 metres
Total Dissolved Solids in input water Upto 2000 mg/lit
Total hardness of input water 500 mg/lit (max)
Iron in input water 0.3 mg/lit (max)
Turbidity of input water
1 NTU (max)
Germkill Kit
TM
Material of construction Food grade, non-toxic, engineering-grade plastics
Germkill Kit-1
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter – 1 No
Post-RO Carbon Filter – 1 No
TDS Modulator – 1 No
Germkill Kit-2
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter – 1 No
Post-RO Carbon Filter – 1 No
Post-Carbon Sediment Filter – 1 No
RO Membrane – 1 No
TDS Modulator – 1 No
Germkill performance standard
Meets stringent international criteria for microbiologically
safe drinking water – e.g., Environmental Protection Agency (EPA), USA
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality,
TDS, pressure and life of Filter elements.
** 10 litres of storage only with running water. Or else 9.2 litres of water dispensing.
*** Input water quality and TDS content are important determinants of output water quality.
**** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the
pressure is lesser than 5 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not
be installed in a house where input pressure is greater than 60 psi.
#
Technical specifications are subject to change or improvement without prior notice.
5
6
4
7
2
3
1
(18 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern