PURE Marvella RO Spezifikationen Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
22 23
CLEANING AND MAINTENANCE
18
In case UV lamp breaks, carefully sweep all the fragments, wipe the area with a
wet towel, and dispose all the fragment including the used towel in a sealed plastic bag.
Open windows to allow room to ventilate. Do not use vacuum. Hand over the bag to the
service technician for proper disposal of the same when he visits to put a new UV lamp.
19
Always drain the water in the storage tank if you have not used the purifier for more than 2 days.
17
The output water may continue to have flora which are harmless and pose no health
hazard to normal healthy adults and children.
16
You should only store water in the purifier and not use other bottles and containers.
If you do so, water may get contaminated.
15
Please dispose the used consumables along with the other household waste through
the municipal disposal system.
PURITY
INDICATOR
TANK FULL
INDICATOR
TANK
FULL
TDS IN TDS OUT
TANK
FULL
G
K
K
1
G
K
K
2
Very low
Low
Moderate
High
Very high
Low
Moderate
Moderate
High
Very high
Extremely high
TDS range
represented
TDS range
represented
Germkill Kit 2
Life Indicator
Germkill Kit 1
Life Indicator
Purity
Indicator
Purity
Indicator
UNDERSTANDING THE DIGITAL
DISPLAY PANEL
CHANGE
GKK 1
CHANGE
GKK 2
GUIDED ALERT
SYSTEM
UNDERSTANDING THE DIGITAL DISPLAY PANEL
*^* TDS (Total Dissolved Solids) indications are measured on the basis of conductivity of output water and this conductivity
depends on 1) mobility of ions 2) valency of ions 3) concentration of ions and 4) the temperature of water. The display of TDS
values is an indicative range and not an absolute value. Purity Indicator will only function when there is input water in the purier.
In case there is no input water in the purier, then the Digital Display Panel will show an error and there will be one band lit on
either side of the panel. This is a default state indication and does not reect the Purity Level of water.
You can see the quality of water through the Purity Indicator only when water is being puried or the purier is in use.
Quality here refers to the TDS range of water.
The bars on the left and right show the indicative range
of TDS in the input and output water respectively,
as shown above. The level of these bars will change
depending on the quality of input water. *^*
Tank full indicator will be illuminated once the storage
tank is full.
Extremely low
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare