PURE 9015TS Bedienungshandbuch PDF herunterladen (Seite 18)

STEP 5 – FRAME PAD ASSEMBLY

Youwillneed2adultstoassembletheframepadtokeepitevenduringinstalla-

tion.

A. Lay the Frame Pad (2) over the trampoline so that the springs and the steel frame are covered. Ensure

that the Frame Pad covers all metal parts.

B. Make sure that the stitched ap of the frame pad is able to be folded under the top rail.

C. Attach elastic bands to the tramp mat as shown in gure C, but do NOT pull them too tight or they will

break off after a period of use. Thebandsrequireacertainamountofslack,astheyare  

attachedtothejumpingsurfacewhichwillhavesignicantverticalmovementdur  

inguse.Failuretoleaveslackinthebandswillresultinthebandstearingloose  

fromthepad,and/orthepadshiftingoffofthetoprailuponuse. For stability you should also

cross the band under itself when looping it around the top rail to prevent wear and tear on the stitched ends of

the elastic bands.

D.Once bands are secured, pull drawstring so the stitched ap ts under the top rail.

E.The trampoline pad should be the slightest bit loose so it “oats” a bit with movement. Keep in mind it

willrequirereadjustmentafteraperiodofuse.

F. STOP using the trampoline if it shifts during use, and have an adult readjust it.

EnclosurePartsList&AssemblyInstructionsonNextPage

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Keine Kommentare

PURE 9015TS Bedienungshandbuch Seite 18