PURE 9015TS Bedienungshandbuch PDF herunterladen (Seite 17)

Thefollowingguresshowhowtoconnectthespringsandtightenthetrampoline

matasevenlyaspossible:

A. Using a “clock” as a relative guide, choose a point that represents 12 o’clock on your jump mat. Attach the

spring to the V-ring of the jump mat. Attach the hook end of the tool to the other end of spring as shown in the

directions on the previous page, and line up to the spring hole. Pull the tool and attach the spring hook so it

links up to the hole in the top rail. Following the diagram on the right, repeat this at the 6 o’clock, 3 o’clock, and

then 9 o’clock points.

B. Repeat this process to attach the remaining springs in a similar way. It is VERY IMPORTANT that the

trampoline mat should tighten as equally as possible. To achieve this, make sure that you always attach two

springs across from each other, otherwise you will not be able to attach all the springs due to the tension on

the trampoline mat. The tension will increase with the number of attached springs.

C. If you notice that a spring is not hooked directly to its corresponding hole in the top rail, but the tension is

too great to currently move it, leave the V-Ringemptyonthejumpmatthat the hole in the top rail should

have been hooked to. Remember to also leave theholeinthetoprail empty that the current, incorrectly

installed spring should have been hooked into so that this spring can be inserted there when tension allows for

correction of this issue.

D. After assembly, the space between all springs should be equal.

E. If you notice that you have skipped a hole and/or V-Ring connection, recount and remove or attach any

springs required. NEVER leave spaces on the V-Rings on the jump mat or empty holes on the top rail.

STEP 4 – SAFETY PLACARD ATTACHMENT

A. Using the tie wrap, attach the Safety Instruction Placard (8) to the trampoline. The tie wrap should go around

the Vertical Frame joint and the Top Rail to ensure it remains attached.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Keine Kommentare

PURE 9015TS Bedienungshandbuch Seite 17