Pure Chronos iDock Bedienungsanleitung PDF herunterladen (Seite 14)

Audio

Set the Treble and Bass levels.

Manual tune

Shows DAB signal level, which can help you find the best position for your radio.

1. Use the +/- buttons to scroll through different channels and push Select to choose one

(UK stations are in the range 11B to 12D). You see a signal level display. The empty

block indicates the minimum required level for reception and the filled blocks indicate

the current level.

2. Move your aerial/unit and to try to raise the current level to the empty block or beyond.

Once you have a good signal the display will show the Multiplex name and add the

stations to the station list.

3. Push the Menu button to exit or +/- and Select buttons to change channel.

FM only options

FM stereo mode

Choose from Stereo or Mono − mono may improve audio clarity where stereo signals are weak.

Help and specifications

Secondary and inactive stations

(<</>>) Secondary DAB services

Secondary services accompany some stations, providing extra information or alternative content

and may only be broadcast at certain times. If a station has secondary services available, the

station shows ‘>>’ next to its name in the station list and the secondary service appears next to

the station in the list. A secondary service has a ‘<<’ before its name in the station list.

(?) Inactive or unavailable DAB stations

Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned

to. A station may be inactive or unavailable because the station is not broadcasting at the current

time (check with the station) or has stopped broadcasting altogether. Also, you may not have a

strong enough signal to receive the Multiplex on which the station is broadcast.

Hints and tips

The message on screen says ‘ No stations available’

DAB reception is not strong enough to receive any stations. Check that your aerial is fully uncoiled

and use Autotune (page 10) to search for stations. Try adjusting your aerial and radio position.

The screen is very dark

Check the Display settings. Check that the light sensor is not obstructed if Auto dimming is

selected.

The on-screen clock does not appear

If you disconnect the unit from the mains whilst listening to your iPod and then plug it in again,

you may need to change the audio source to DAB so that the time can be acquired from the DAB

signal.

1 2 ... 9 10 11 12 13 14 15 16 17

Keine Kommentare

Pure Chronos iDock Bedienungsanleitung Seite 14