Pure Chronos iDock Bedienungsanleitung PDF herunterladen (Seite 13)

Other options

Display

Press the Menu button and select ‘Display’. You can customise the display settings for both

Active and Standby modes. The diagram below shows the available options.

Active mode: Backlight settings that apply when the unit is switched on.

Standby mode: Backlight settings that apply when the unit is in Standby.

Timed: The display backlight brightens when a button is pressed then

switches off after no button has been pressed for a few seconds.

Always on: The display is constantly on as defined by your Brightness and

Contrast settings.

Auto dimming: The display backlight alters automatically depending on the ambient

light conditions.

Brightness: Adjust between 1 (very dim) and 9 (very bright).

Contrast: Adjust between 1 (low) and 16 (high).

Setting the clock

Clock set

You can manually set the time and date if required. If you have a DAB signal the time and date

will be updated automatically.

12/24 Hour set

Choose 12 hour or 24 hour clock display

Display

Brightness

Contrast

Timed

Always on

Active mode

Standby mode

< 1 - 9 >< 1 - 16 >

Timed

Always on Auto dimming

1 2 ... 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Pure Chronos iDock Bedienungsanleitung Seite 13