PURE Marvella RO Spezifikationen PDF herunterladen (Seite 16)

28 29

What are all the consumables which are

to be replaced?

You need to replace the pre-sediment lter and carbon

lter when the “CHANGE CSF” starts blinking RED.

These parts can be bought together by ordering

“CSF Germkill Kit™”

You need to replace the Pre-sediment lter, carbon lter,

Post-sediment lter, RO Membrane and Ultra Ventilated

Membrane (UVM) when the “CHANGE ROM” starts

blinking RED. These parts can be bought together by

ordering “Membrane cum CSF Germkill Kit

”.

Can I drink the rst purication cycle of water

from the purier?

No, it is recommended to throw the rst cycle of water

that is lled in the storage tank when the new Pureit

Marvella RO purier is installed, and also whenever the

Germkill Kits™ are replaced.

What should I do if there is no puried water in

the storage tank?

IIn case there is no puried water in the storage tank

then you need to rst check whether the LED display

shows RED in either “CHANGE CSF” or “CHANGE

ROM”. If it shows GREEN or is blinking RED and still

there is no water supply then you can check whether

the ball valve is closed or the power is off. If none of

the above 3 cases are true, please call Pureit service

centre for help.

Can I open and service my purier?

It is not recommended to open and service device by an

individual. Call our customer care if you face any issue

which requires servicing and opening the device.

Can I use the reject water?

It is not recommended to use the reject water for

any kind of consumption (drinking or cooking). It can

probably be used for gardening or cleaning oors.

What should I do if any part of the purier is

broken?

Please call the Pureit helpline number. Our technicians

will visit your house and will guide you on the repairs

required. There will be a nominal visiting charge and you

would need to buy the parts required.

What should I do if there is a leakage from the

purier?

First switch off the ball-valve if you nd any leakage from

the purier and turn off the power switch. Check for any

visual improper tment (like tap) and then call our Pureit

helpline number and register a service request.

How long the stored water in Pureit Marvella

You can use stored water for 2 days. If it is not used for

more than 2 days we advice you to discard that water,

rell and then consume.

The water from the purier tastes unusual

This might be because of one or more of the following reasons:

a) The storage tank has not been cleaned for a long time –

Please clean the storage tank after removing the water with a mild

hypochlorite solution. The hypochlorite solution can be ordered by calling

our helpline number.

b) The water is stored for too long in the storage tank –

Please drain the stored water and ll fresh water.

c) The lters or the membranes need to be replaced/cleaned –

Please replace or get them cleaned by calling the Pureit helpline number.

The purication is taking more time

This might be because of one or more of the following reasons:

a) The ball valve may not be opened fully – Please ensure the ball valve is open

completely so that the water ow is not restricted.

b) The temperature of input water might have dipped drastically.

c) Check if the lter is choked or damaged, if yes then you need to replace

the lters.

The storage tank is not getting lled

This might be because of one or more of the following reasons:

a) Check if the ball valve is kept open.

b) Check if either ‘replace CSF’ or ‘replace ROM’ is RED. If yes then replace

the lters/membrane.

c) Check if there is any leakage from the purier and if there is any leakage then

call the Pureit helpline number.

TROUBLESHOOTING

1 2 ... 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

PURE Marvella RO Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserspender PURE Marvella RO