Pure Tempus-1XT - User Guide Bedienungsanleitung PDF herunterladen (Seite 9)

Audio settings

Digit al output

The Digital Output setting controls the Digital Out socket on the rear of your radio. Select one of the following options:

On - if you want continuous output to an amplifier or recorder.

Off/Timer - if you want to connect to a recorder with a synchro-record feature.

DRC value

DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear. The DRC level of a

broadcast is set by the station and sent with the signal. At the time of writing in the UK only BBC Radio 3 and 4 regularly

use DRC. Turn the Tune knob to scroll through the following options and push to select one:

DRC 0 DRC is switched off. Any DRC level broadcast will be ignored.

DRC ½ DRC level is set to ½ that sent with the broadcast.

DRC 1 Applies the DRC level as sent with the broadcast.

Display settings

Brightness

To change the screen brightness turn the Tune knob to choose between Low, Low/Timeout (turns backlight off after a

timeout) and High and push to select one.

Standby mode

You can choose whether the backlight is on or off when your TEMPUS-1

is in standby mode. If you switch the backlight

off in standby mode a touch on the SnoozeHandle will override this and turn the backlight on for a few seconds to

display the clock, useful for checking the time in the middle of the night. To change the display standby mode turn the

Tune knob to choose between Backlight On and Backlight Off and push to select one.

Sw version

Displays the version number of the software installed in your radio. You may be asked to quote this if you contact

Technical Support.

Sw upgrade

You can upgrade the software in your TEMPUS-1

using a PC connected to the USB connection on the rear panel. To

install an upgrade, select Sw upgrade and follow the instructions provided with the software. Upgrades may be issued

to provide enhanced functions or improve performance. Check our website for details of when software upgrades are

available and instructions on how to install them. To exit the Software upgrade menu press the Menu button again.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Pure Tempus-1XT - User Guide Bedienungsanleitung Seite 9