7
Hints and tips
(<</>>) Secondary services
Secondary services accompany some stations, providing extra information or alternative content and may only be broadcast at certain times.
At the time of writing not many secondary services are available. If a station has one or more secondary services available the display will
show ‘>>’ next to the station name on the station list and the secondary service will appear next to the station as you turn the Tune knob. A
secondary service will display ‘<<’ before the service name on the station list indicating that it belongs to the station preceding it in the list.
(?) Inactive or unavailable stations
Inactive or unavailable stations are those which appear on the station list but are not currently available because either you are outside the
broadcast area, have lost reception or the station is not currently broadcasting. Unavailable stations have a ‘?’ before their name on the station
list. If you select a station which has this symbol, your radio tries to tune to that station. If still unavailable, you will return to the last station you
were listening to.
I hear a ‘burbling’ sound on some stations
Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the signal strength is too low. If that happens,
a ‘burbling’ sound can sometimes be heard. To help reduce this, check that your aerial is fully extended and upright. If the problem persists try
moving your radio or repositioning your aerial using the tuning aid.
Display says ‘ No stations available’
Check that your aerial is fully extended. Use Autotune to search for stations. Try using the tuning aid to adjust your aerial or radio position.
My alarm didn’t work
Check the alarm settings and make sure that the alarm is set to ‘On’ (If in standby you should now see an alarm icon on the screen). If a radio
alarm, make sure the volume was turned up. Check that you don’t have headphones plugged in.
Clock shows the wrong time
This may happen if the multiplex you are tuned to broadcasts an incorrect time signal, try tuning to a station in another multiplex.
I can’t hear any audio
If the display is only showing a clock and there is no audio, your EVOKE-1
XT
is in standby. Push Standby to switch it on.
Resetting your radio
Resetting your EVOKE-1
XT
removes all presets, stored stations and favourite station settings and resets all options to defaults. To reset:
1. Press and hold the Menu button for three seconds. The screen shows ‘Press Tune to confirm reset’.
2. Push the Tune knob to confirm the reset or press no buttons to cancel the reset.
(28 Seiten)
(132 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern