Pure DRX-70x series tuners Bedienungsanleitung PDF herunterladen (Seite 12)

Using the remote control

This section provides information on using the remote control. The infrared remote control provides access to the main functions of your

DRX-702ES and also facilities such as presets and volume control. Before using your remote, insert the supplied batteries. Aim the remote

control at the sensor on the display panel on your DRX-702ES.

Buttons (0-9) and the Store button enable you to store your favourite radio services for easy access.

To store a station

You can store a station to a preset while listening to it or when you see the station name on the bottom line of the

display while scrolling through the station list.

1. Press the Store button. The display on your DRX-702ES shows ‘Store preset’

2. Press the number (from 1 to 99) under which you want to store the preset.

3. Press the Select button to confirm your selection.

To recall a previously stored station

Press the numbered button(s) under which you stored the station. If the selected preset is empty, the display

shows ‘ Preset empty’ for a few seconds and you will continue to hear the currently selected station.

Press the Display button and repeat to cycle through the seven display modes. This button performs the same function

as the Display button on the main unit.

The Setup button enables you to view the advanced setup menu on your DRX-702ES. This button performs the same

function as the Setup button on the main unit.

Press the Setup button to enter the menu then use the Up/Down button to scroll through the menu options and push

the Select button to select that option.

The Up, Down and Select buttons enable you to scroll through and select stations and menu options. Together, these

buttons perform the same function as the large tuning knob on the main unit.

The Mute button is a quick way of reducing the output volume from your DRX-702ES.

1. Press the Mute button to mute the sound. The display on your DRX-702ES shows 'Mute'.

2. Press the Mute button again or change station to return to the previous listening volume.

Press the Brightness button and repeat or hold to cycle through the eight display brightness levels. This button performs

the same function as the Brightness button on the main unit.

The Autotune button enables you to perform an autotune to find new stations. This button performs the same function

as the Autotune button on the main unit.

The Volume +/- button increases (+) or decreases (—) the output volume of your DRX-702ES. A level indicator is shown

on the display while you adjust the volume.

Press the Power button to turn your DRX-702ES on or return it to standby. This button performs the same function as the

Power button on the main unit.

The Band button enables you to change between DAB, FM and AM modes. This button performs the same function as

the Band button on the main unit.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Pure DRX-70x series tuners Bedienungsanleitung Seite 12