4 5
KNOW YOUR PUREIT MARVELLA RO+UV
1 Tap
2 Indicators
3 Post-Carbon Sediment Filter
4 RO Membrane Housing
5 UV Reactor
6 Post-RO Carbon Filter
*
7 Pre-RO Carbon Filter
8 Pump
9 Low Pressure Switch
10 Solenoid Valve
11 Flow Restrictor
12 Control Circuit
13 Storage Tank
14 Pre-Sediment Filter
15 Waste Water Tube
16 Cleansing Solution Dispenser
17 Inlet Water Tube
18 TDS Modulator
1 Cleaning Solution Dispenser
2 Storage Tank Indicator
3 Pre Sediment Filter Indicator
4 GKK -
1 Life Indicator
5 GKK - 2 Life Indicator
6 Storage Tank
7 Tap
8 Sediment Filter Assembly
9 Inlet Water Tube
10 Ball Valve Assembly
11 Ball Valve
12 Waste Water Tube
TECHNICAL SPECIFICATIONS OF
PUREIT MARVELLA RO+UV PURIFIER
#
Pureit Marvella RO+UV
Height 488 mm
Width 360 mm
Depth 294 mm
Weight of ‘Pureit Marvella RO+UV’ ~ 8.3 kg
Flow Rate
*
Approximately 9 –12 litres per hour
Storage Tank Capacity 10 litres
6-Stage Purifying Technology
PP Melt Blown Pre-Sediment Filter, Pre-RO Carbon Filter,
Post-Carbon Sediment Filter, Reverse Osmosis Membrane,
UV Reactor and Post-RO Carbon Filter
Membrane type Thin-film composite spiral wound
Pump type Diaphragm pump, 24V dc
% Recovery
*
Typically 25%
TDS Reduction
**
90% (min.)
Input Water pH Range 6.5 – 8.5
Power Rating 48 Watts
Pressure Rating 5 – 30 PSI
***
Rated Voltage Rated Voltage 140 to 240 V a.c., 50/60 Hz
Material of Construction for Plastic Parts Food safe, non-toxic, engineering grade plastics
Length of Power Adaptor
1.5 metres
Total Dissolved Solids Up to 2000 mg/lit
Total Hardness 500 mg/lit (max.)
Iron 0.3 mg/lit (max.)
Turbidity
1 NTU (max.)
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality,
TDS, pressure and life of Filter elements.
** Input water quality and TDS content are important determinants of output water quality.
*** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the
pressure is lesser than 5 PSI than you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not
be installed in a house where input pressure is greater than 60 psi.
#
Technical specifications are subject to change or improvement without prior notice.* Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
CHANGE
Germkill Kit
™
Material of Construction Food safe, non-toxic, engineering-grade plastics
Pre-Sediment Filter
Pre-Sediment Filter – 1 No.
GKK - 1
Pre-Sediment Filter – 2 Nos.
Pre-RO Carbon Filter – 1 Nos.
Post-RO Carbon Filter – 1 No.
TDS Modulator – 1 No.
GKK - 2
Pre-Sediment Filter – 2 Nos.
Pre-RO Carbon Filter – 1 No.
Post-Carbon Sediment Filter – 1 No.
RO Membrane – 1 No.
Post-RO Carbon Filter – 1 No.
TDS Modulator – 1 No.
Germkill Performance Standard
Meets stringent international criteria for microbiologically
safe drinking water – e.g., Environmental Protection Agency (EPA), USA
6
7
8
9
10
11
12
1
2
3
4
5
2
1
5
7
9
14
10
12
18
6
11
13
16
3
4
15
17
8
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern