PURE Marvella RO Spezifikationen PDF herunterladen (Seite 14)

24 25

FAQS

How does Pureit Marvella RO+UV purify water?

Pureit Marvella RO+UV has a 6-stage purication system

which ensures you get water that is ‘As Safe As Boiled

Water

™

’ and also removes excess total dissolved solids

(TDS) to make your water tastier.

In the rst stage, the water passes through the

Pre-Sediment Filter which removes ne and coarse

particulate impurities/dirt.

The second stage is the Pre-RO Carbon Filter that

removes chlorine and organic impurities like harmful

pesticides. It also adsorbs bad taste and odour-causing

organic compounds from water.

The third stage is the Post-Carbon Sediment Filter which

removes the remaining dirt.

Then the water passes through the RO Membrane at

high pressure, with the help of an inbuilt pump. The RO

removes dissolved salts, hardness, pesticides and heavy

metals like arsenic, lead and mercury. It also removes

microbial contaminants like bacteria, virus, protozoa

and parasites.

Fifth stage is a UV reactor that acts as an additional stage

of purication to further inactivate bacteria, virus and

parasites to deliver safe water.

After UV Reactor, water passes through a TDS Modulator

that adds adequate quantities of essential minerals

to the water.

What is the storage capacity of

‘Pureit Marvella RO+UV’?

Pureit Marvella RO+UV has a storage tank capacity of

10 litres. The process of lling the storage tank is fully

automatic and when you take water out of the tank, the

purication process automatically starts and rells the

storage tank.

How much time it takes to purify water in

‘Pureit Marvella RO+UV’?

Pureit Marvella RO+UV can purify water upto 9–12 litres

per hour. However, the time taken to purify depends on

the life of the Filters, the input water pressure, TDS and

other impurities present in water.

‘How will I get new consumables/Membranes

replaced?

You need to call the Pureit Helpline and order for

a Germkill Kit

™

. The Pureit Helpline specialist will

visit your place and replace the Germkill Kit

™

a nominal cost.

Why is the "Tank Full" indicator blinking when

I switched on the purier for the rst time?

Pureit Marvella RO+UV has been designed in such a way

that during the rst time startup of the device, the “Tank

Full” indicator will blink for 15 minutes (maximum) and

then normalise for usage.

The Advance Alert System

™

did not give me

15 days warning before the purier stopped

working. Why is it so?

There may be several reasons for this.

While the Germkill Kits and the SF have xed

replacement schedules, depending on your input water

quality the SF might need a replacement even before the

purier gives you an alert. In such cases, please contact

Pureit helpline on 1860-210-1000 and get the SF replaced.

Also, Advance Alert System

™

will alert you 15 days

before end of every 180 days (approximately) or

15 hours before completion of every 200 hours of pump

running time, whichever is earlier. The purier will

communicate the alert only if the purier is in a switched

on condition during the scheduled alert time. Post the

completion of the scheduled alert time, Auto Shut off

™

of water will be activated automatically, even if the

purier is in a switched off condition.

Can I drink the rst purication cycle of water

from the purier?

No, it is recommended to throw the rst cycle of water

that is lled in the storage tank when the new Pureit

Marvella RO+UV purier is installed, and also whenever

the Germkill Kit

™

(s) are replaced.

What should I do if there is no puried water in

the storage tank?

In case there is no puried water in the storage tank

then you need to rst check whether the LED display

shows RED in either “CHANGE GKK-1” or “CHANGE

GKK-2”. If it shows GREEN or is blinking RED and still

there is no water supply then you can check whether

the Ball Valve is closed or the power is off. If none of

the above 3 cases are true, please call Pureit Helpline

for help.

Can I open and service my purier?

It is not recommended to open and service device by an

individual. Call our Pureit Helpline if you face any issue

which requires servicing and opening the device.

Can I use any type of water to purify through my

Marvella RO+UV?

Pureit Marvella RO+UV will purify “potable” water for

removal of hardness and other impurities to give you safe

drinking water. If the input water has impurities normally

not present in drinking water (high iron/turbidity/

microbial contamination etc.) or water is from unknown

source (river/lake/pond/borewell etc.) then suitable

pretreatments may be required.

Can the Pre-Sediment Filter or the other lter

parts choke before the Advance Alert ?

While the Germkill Kits and the Sediment Filter have

a xed replacement schedule, you might be required

to change the lters in the interim depending on

the quality of your input water.

Should the tap ow rate be very less or if it is taking too

long for the tank to ll, then please contact the Pureit

Helpline at 1860-210-1000 to change the membranes.

These extra visits will be chargeable as per T&C.

Can I use the reject water?

It is not recommended to use the reject water for

any kind of consumption (drinking or cooking). It can

probably be used for gardening or cleaning oors.

What should I do if any part of the purier is

broken?

Please call the Pureit Helpline. Our technicians will visit

your house and will guide you on the repairs required.

There will be a nominal visiting charge and you would

need to buy the parts required.

What should I do if there is a leakage from the

purier?

First switch off the Ball-Valve if you nd any leakage from

the purier and turn off the power switch. Check for any

visual improper tment (like tap) and then call our Pureit

Helpline and register a service request.

How long the stored water in

Pureit Marvella RO+UV can be used for drinking?

You can use stored water for 2 days. If it is not used for

more than 2 days we advice you to discard that water,

rell and then consume.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

PURE Marvella RO Spezifikationen Seite 14

Kommentare zu diesen Handbüchern