PURE Marvella RO Spezifikationen Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
22 23
Indicator
Indicator
Status
Frequency of indication Indication
Storage
Tank Full
No light N/A Tank is not full
Green N/A Tank is full
Change SF
Green N/A Pre-Sediment Filter is safe to use
Blinking
Red
165 days of clock time or
185 hours of pump running
time, whichever is earlier, after
device installation or GKK
replacement
Life of the Pre-Sediment Filter will end
soon. Please contact the Pureit helpline
and get your Pre-Sediment Filter
replaced*
Solid Red
180 days of clock time or
200 hours of pump running
time, whichever is earlier after
device installation or GKK
replacement
This indicates the life of the
Pre-Sediment Filter is completed and
must be replaced. At this point,
Auto Shut Off
shuts the water ow
ensuring you don’t drink unsafe water
even by accident
Change
GKK - 1
Green N/A
GKK-1 is safe to use
Blinking
Red
After every 345 days of clock
time or 385 hours of pump
running time, whichever is
earlier, after device installation
or GKK-2 replacement
GKK-1 life will end soon. Please contact
the Pureit helpline to replace your
GKK-1
Solid Red
After every 360 days of clock
time or 400
#
hours of pump
running time, whichever is
earlier, after device installation
or GKK-2 replacement
GKK-1 life is completed and must be
replaced. At this point, Auto Shut Off
shuts the water ow ensuring you don’t
drink unsafe water even by accident
Change
GKK - 2
Green N/A GKK-2 is safe to use
Blinking
Red
After every 705 days of clock
time or 785 hours of pump
running time, whichever is
earlier, after device installation
or previous GKK-2 replacement
GKK-2 life will end soon. Please contact
the Pureit helpline to replace your
GKK-2
Solid Red
After every 720 days of clock
time or 800 hours of pump
running time, whichever is
earlier, after device installation
or previous GKK-2 replacement
GKK-2 life is completed and must be
replaced. At this point, Auto Shut Off
shuts the water ow ensuring you don’t
drink unsafe water even by accident
CHANGE
GKK-1
CHANGE
GKK-2
STORAGE
TANK FULL
CHANGE
SF
In case of key electrical faults (UV, RO Pump, RO SV, booster pump) the 2nd, 3rd, and 4th LEDs will start blinking red and the device
will stop purifying water.
During the initial start up of the device, the tank full LED will blink for max 15 min and then restore to normal operation thereafter.
#
After every 400 hours of pump running time or 360 days of clock time, whichever is earlier, the respective Germkill Kit™ needs to
be changed. Every 400 hours of pump running time typically gives 4000 litres of purified water under test conditions of 18 PSI input
pressure, 450500 ppm TDS and 25 °C temperature.
While the Germkill Kits and the Sediment Filter have a fixed replacement schedule, you might be required to change the
SF in the interim depending on the quality of your input water.
* There is a free Sediment Filter in your device which needs to be preserved to facilitate the above change. In case you misplace the
free SF, then at the time of Sediment Filter change you will have to buy the same at extra cost.
ORDERING SF, GKK-1 AND GKK-2
Phone
1860–210–1000
Log in
www.pureitwater.com
ADVANCE ALERT SYSTEM
*
OF PUREIT MARVELLA RO+UV
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare