PURE Marvella RO Spezifikationen Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
4 5
KNOW YOUR PUREIT MARVELLA RO
1 Tap
2 Indicators
3 Ultra Ventilated Membrane (UVM)
4 RO Membrane
5 Post-Sediment Filter
6 Taste Modulator / Post RO Carbon Polisher* (Optional)
7 Carbon Filter
8 Pump
9 Low Pressure Switch
10 Solenoid Valve
11 SMPS
12 Control Circuit
13 Storage Tank
14 Pre-Sediment Filter
15 Waste Water Tube
16 Cleaning Solution Dispenser
1 Cleaning solution dispenser
2 Power indicator
3 Storage tank indicator
4 CSF (Carbon & Sediment Filter) life indicator
5 Membrane life indicator
6 Storage tank
7 Tap
8 Sediment filter assembly
9 Inlet tube
10 Diverter controller
11 Diverter assembly
12 Waste water pipe
TECHNICAL SPECIFICATIONS OF
PUREIT MARVELLA RO™ PURIFIER
#
Pureit Marvella RO
Height 480 mm
Width 360 mm
Depth 265 mm
Weight of ‘Pureit Marvella RO™’ 8.4 kgs
Flow rate* Approximately 9 –12 litres per hour
Storage tank capacity 8 litres
5 Stage Purifying Technology
PP melt blown sediment filters, Activated carbon block,
Reverse osmosis membrane and Ultra ventilated membrane
Membrane type Thin film composite spiral wound
Pump type Diaphragm pump, 24V DC
% Recovery* Typically 25%
TDS reduction** Upto 90%
Power rating 36 Watts
Pressure rating 530 PSI***
Input Voltage 100-240VAC, 50-60 Hz
Material of construction for plastic parts Food safe, non-toxic, engineering grade plastics
Length of Power adaptor 1.8 metres
Total Dissolved Solids 200 mg/lit (min) – 2000 mg/lit (max)
Total Hardness 500 mg/lit (max)
Iron 0.3 mg/lit (max)
Turbidity 10 NTU
Germkill Kit
TM
Material of construction Food safe, non-toxic, engineering-grade plastics
Purification capacity
(CSF Germkill Kit™)
The consumables Germkill Kit
TM
has been designed to give
approximately 4000 litres
of purified water depending on the input
water pressure, TDS and water temperature
Purification capacity
(Membrane Germkill Kit™)
The RO Membrane and Ultra Ventilated Membrane (UVM) has been
designed to give approximately 8000 L
of purified water. The actual
life of the filters will depend on the input water pressure and TDS
and water temperature
Germkill performance standard
Meets stringent international criteria for microbiologically
safe drinking water –
e.g., Environmental Protection Agency (EPA), USA.
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality,
TDS, pressure and life of filter elements.
** Input water quality and TDS content are important determinants of output water quality.
*** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the
pressure is lesser than 5 PSI than you need to buy ‘Pressure enhancing pump’ at an additional cost.
#
Technical specifications are subject to change or improvement without prior notice.
While Germkill Kit™ (CSF) will be changed after 4000 litres and there’s an Auto Shut Off to force this change,
Sediment Filter may have to be changed in the interim depending on the quality of input water.
* Post RO Carbon Polisher fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
POWER
STORAGE
TANK
FULL
CHANGE
CSF
CHANGE
ROM
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
7
6 5
8
15
10
9
14
13
16
12
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare