PURE Marvella RO Spezifikationen PDF herunterladen (Seite 15)

26 27

GERMKILL KIT™

Pureit Marvella RO™ works on a set of consumables which needs to be replaced at

regular intervals based on the water consumption.

There are 2 types of Germkill Kit™ of Pureit Marvella RO™:

CSF (Carbon and Sediment Filter) Germkill Kit™: This consumable set

includes pre-sediment filter and the carbon filter. The life of both

the components is approximately 4000 litres*

of purified water depending on the

input water pressure and TDS. You need to change the CSF Germkill Kit™ when the

‘Change CSF’ indicator turns RED.

Membrane cum CSF Germkill Kit™: This consumable set includes a Pre-sediment filter,

Post-sediment filter, Carbon filter, RO Membrane and UVM. The life of the RO Membrane and UVM is

approximately 8000 litres*

of purified water depending on the input water pressure and TDS. You need

to change the Membrane Germkill Kit™ when the ‘Change ROM’ indicator turns RED.

*Please note the Membrane Cum CSF Germkill Kit™ contains Pre-sediment filter & Carbon

filter for which the life is typically 400 hours, under tested conditions of 18 PSI input pressure,

450–500 PPM TDS and 25 ºC temperature.

While Germkill Kit™ (CSF) will be changed after 4000 litres and there’s an Auto Shut Off

to force this change, Sediment Filter may have to be changed in the interim depending on

the quality of input water.

Pre-sediment filter

RO Membrane Post-sediment filter

Ultra Ventilated

Membrane (UVM)

Carbon filter

FAQS

How does Pureit Marvella RO™ purify water?

Pureit Marvella RO™ has a 5-stage purication system

which ensures you get water that is ‘As Safe As Boiled

Water™’ and also removes excess total dissolved solids

(TDS) to make your water tastier.

In the rst stage, the water passes through the

Pre-sediment lter which removes ne and coarse

particulate impurities/dirt.

The second stage is the Carbon lter that removes

chlorine and organic impurities like harmful pesticides.

It also adsorbs bad taste and odour-causing organic

compounds from water.

The third stage is the Post-sediment lter which removes

the remaining dirt.

Then the water passes through the RO Membrane at

high pressure, with the help of an inbuilt pump. The RO

removes dissolved salts, hardness, pesticides and heavy

metals like arsenic, lead and mercury. It also removes

microbial contaminants like bacteria, virus, protozoa

and parasites.

The last stage is the Ultra Ventilated Membrane (UVM)

which acts as an additional assurance of safety towards

microbial contaminants.

What is the storage capacity of ‘Pureit Marvella

RO™’?

Marvella RO™ has a storage tank capacity of 8 litres.

The process of lling the storage tank is fully automatic

and when you take water out of the tank, the purication

process automatically starts and rells the storage tank.

How much time it takes to purify water in ‘Pureit

Marvella RO™’?

‘Pureit Marvella RO

’ can purify water upto 9–12 litres

per hour. However, the time taken to purify depends on

the life of the lters, the input water pressure, TDS and

other impurities present in water.

What is Advance Alert System?

Pureit’s Advance Alert System give you a complete

status update on the functioning of your purier thereby

assuring you safe water and maximum convenience.

It has 4 indicators:

Power - Tells you if the purier is ON or OFF. When it is

ON it will turn GREEN.

Water Tank Full – Tells you if the water tank is full or

not. This indicator will turn GREEN when the tank is full.

Change CSF – Tells you if the consumables

(which includes the pre-sediment lters and the carbon

lter) is safe, nearing end of life or has reached end of life.

When the light is GREEN, it indicates the lters are

safe to use.

When the light starts blinking RED, it indicates that the

lters have reached 385 hours of usage and nearing the

end of life (400 hours*

) and only 15 hours of usage is

left before you replace them.

When the light turns completely RED it indicates that the

lters need to be replaced and puried water supply has

been stopped.

Change ROM – Tells you if the RO Membrane is safe,

nearing end of life or has reached end of life.

When the light is GREEN, it indicates the membrane is

safe to use.

When the light starts blinking RED, it indicates that the

membrane has reached 785 hours of usage and nearing

its end of life of 800 hours** and only 15 hours of usage

is left before you replace them.

When the light turns completely RED then it indicates

that the RO Membrane, Ultra Ventilated Membrane

(UVM) and Post-sediment lter needs to be replaced

and the water supply has been stopped.

*Please note you need to replace the Pre-sediment

lter and Carbon lter as well when you replace the

RO Membrane and Ultra Ventilated Membrane (UVM).

How will I get new consumables/membranes

replaced?

You need to call the Pureit Helpline number and order

for a Germkill Kit

. The Customer care specialist will

visit your place and replace the Germkill Kit

at a

nominal cost.

* The CSF life of 400 hours approximately gives 4000 litres of puried water under tested conditions of 18 PSI input pressure,

450–500 PPM TDS and 25 °C temperature.

** The ROM life of 800 hours approximately gives 8000 litres of puried water under tested conditions of 18 PSI input pressure,

450–500 PPM TDS and 25 °C temperature.

While Germkill Kit™ (CSF) will be changed after 4000 litres and there’s an Auto Shut Off to force this change, Sediment

Filter may have to be changed in the interim depending on the quality of input water.

1 2 ... 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

PURE Marvella RO Spezifikationen Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserspender PURE Marvella RO