Pure Avalon 300R Connect Bedienungsanleitung PDF herunterladen (Seite 52)

Connecting to a wired or wireless network (Wi-Fi)

You can use the Networks screen to conﬁgure the connection to your local area network and

the internet. This is essential for accessing media servers on your network and On Demand

services on the internet.

To access the Network screen, select Network from the Settings menu.

If Avalon is already connected to a network, the screen will display the status and the current

network settings. If Avalon is not connected, the status will stay ‘Not connected’.

Connecting to a wired network

To connect to a wired network, ﬁrst connect an Ethernet cable from your network (usually from

a spare port on your router/switch/hub) to the Ethernet socket on Avalon. The LEDs set in to

the Ethernet socket will ﬂash to indicate that network activity has been detected.

In the Network screen, select Wired setup.

If you have DHCP enabled on your network (this is the default on most routers), then Avalon will

retrieve your network settings and will automatically connect to your network and the Internet.

If you do not have DHCP enabled on your network, or you wish to set your own IP address

details, you can manually set your network settings.

Configuring automatically with DHCP

To conﬁgure using DHCP, in the Conﬁguration option select Automatic (DHCP). Press the red

(Apply) button.

Avalon will retrieve the correct settings and the status should change to ‘Connected’.

Configuring manually

To conﬁgure manually, in the Conﬁguration option select Static.

You can now enter your preferred IP address, network mask, gateway (usually your routers

address), and DNS server addresses.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Keine Kommentare

Pure Avalon 300R Connect Bedienungsanleitung Seite 52