PURE Jongo S3 Betriebsanweisung PDF herunterladen (Seite 15)

Advanced setup

If your wireless network is not broadcasting an

SSID, you will need to conﬁgure your wireless

settings manually.

1. Press the Advanced tab to open the Advanced

screen.

2. Enter the SSID of your router and select the

encryption type of your wireless network from

the drop-down list below.

Note: Please check your wireless router

conﬁguration to ﬁnd out the type of encryption

that is being used on your wireless network.

3. Enter the key/password needed to connect

to your network in the box below, if one is

required.

4. Choose whether to assign a DHCP or Static

IP address to Jongo by clicking the appropriate

radio button. If assigning a static IP address,

enter the IP address settings in their respective

ﬁelds.

5. Press Save. Jongo will restart and switch on in

Wi-Fi Connected mode.

You will now be able to stream audio from your

smartphone or tablet (see “Streaming from a

smartphone or tablet” on page 9 for more

information).

Clear network settings

To clear all network settings, press the Clear

network settings button.

Note: You will need to reconnect to Jongo in Wi-Fi

Setup mode to re-conﬁgure the network settings.

Troubleshooting

If you are having problems connecting Jongo to

your network, press the Troubleshooting link to

view a series of pages that will guide you through

the Jongo setup steps.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

PURE Jongo S3 Betriebsanweisung Seite 15