PURE TEMPUS-1 Spezifikationen PDF herunterladen (Seite 19)

1. Telescopic aerial Optimise the position of your telescopic aerial by extending it as high as pos si ble and pointing it

vertically. Use the tuning aid to fine tune the aerial placement, see page 18.

2. TV/FM aerial If you have an externally mounted TV or FM aerial it may provide a strong er signal than an indoor

aerial but as they are not tuned for the digital radio fre quen cy range and are pointed at your local TV/FM trans mit ter,

re cep tion may be no better. The standard TV or FM RF connector cannot be plugged into your TEMPUS-1 directly, you

will need to use an RF to F-type adapter. You may also find that you need to use a signal booster if you want to use

the aerial for both TV or FM and DAB reception.

3. External or loft mounted DAB aerial Two main types are used. These types of aerials may

require pro fes sion al in stal la tion:

Dipole – for use in marginal signal areas, this type is om ni di rec tion al and should increase the

strength of all DAB stations being received.

4-element aerial – for use in marginal or poor signal areas, this type is di rec tion al and has

high gain. Like a TV or FM aerial this type needs to point at the trans mit ter. In stal la tion requires

someone to move the aerial while you use the tuning aid. If you receive signals from multiple

trans mit ters you should point your aerial at the one which gives the best signal for the services

you want to listen to.

4. Signal booster This is a signal amplifier which connects into an aerial cable and boosts the

strength of the received signal. If your aerial provides marginal reception, even after adjusting

its position, a booster may improve your reception.

4-el e ment Aerial

Di pole Aerial

1 2 ... 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

PURE TEMPUS-1 Spezifikationen Seite 19