PURE TEMPUS-1 Spezifikationen PDF herunterladen (Seite 14)

Remove the small plugs from the sockets and connect the Digital Out socket to the Digital-in socket on your amplifier or

recorder using an optical cable. Suitable connecting cables are available from PURE Digital, see page 21 for details of

how to contact us.

You also need to switch the Digital Out socket to ‘Off/Timer’ if you want to connect to a recorder with a synchro-record

feature or ‘On’ if you want continuous output to an amplifier or recorder. To do this, Push the Menu button, select Audio

settings and choose Digital output. Select either Off /Timer or On.

Connecting an auxiliary speaker

You can connect a second unpowered speaker to the Aux Speaker socket. This enables full stereo reproduction. Call us

on 01923 277488 to find out more or visit our website at www.pure-digital.com to purchase a matching ST-1 auxiliary

speaker. Note You can also order an ST-1 speaker directly using the form on your warranty card.

Removing the aerial

1. Unscrew the large nut on the end of the telescopic aerial to remove the aerial from the Aerial socket. Take care not

to unscrew the thin nut behind that holds the aerial connector itself in place. A special aerial spanner is available

from PURE Digital, see page 21 for details.

2. Screw the aerial plug of your replacement aerial onto the Aerial connector on the rear of TEMPUS-1.

Connecting to the power supply

Once you have made all other connections, connect the power lead to your TEMPUS-1 and plug the power adapter into a

wall outlet.

Connecting to your PC

The USB connector enables you to connect your TEMPUS-1 to your PC to upgrade your software. Check our website for

details of when software upgrades are available and instructions on how to install them.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Keine Kommentare

PURE TEMPUS-1 Spezifikationen Seite 14