PURE Evoke Mio Bedienungshandbuch PDF herunterladen (Seite 15)

Help and Specifications

Secondary and inactive stations

(<</>>) Secondary digital radio services

Some stations have accompanying secondary services which provide extra information or

alternative content and may only be broadcast at certain times. If a station has a secondary

service available, the station shows ‘>>’ next to its name in the station list and the secondary

service appears next to the station in the list. A secondary service has a ‘<<’ before its name in

the station list.

(?) Inactive or unavailable digital radio stations

Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned

to. A station may be inactive or unavailable because the station is not broadcasting at the current

time (check with the station) or has stopped broadcasting altogether. Also, you may not have a

strong enough signal to receive the Multiplex on which the station is broadcast.

Hints and tips

Display says ‘No stations available’

Use Autotune (see page 10) to search for stations. Try adjusting your aerial or radio position.

Receiving new digital radio stations that have started broadcasting

Use Autotune (see page 10) to scan and add any new digital services to the station list.

The screen is very dark

Check that the light sensor on the front panel is not obstructed.

Using the alarm when a ChargePAK E1 is fitted

When the radio is powered by a ChargePAK E1 for portable listening, i.e., a ChargePAK

rechargeable battery is ﬁtted and the unit is not connected to mains power, the radio switches off

completely when the Standby button is pressed and the alarm will not sound. In this case, the

message ‘Disabling alarm’ will be displayed when the Standby button is pressed.

Resetting your radio

Resetting your radio removes all presets, clears the station list and resets all options to defaults.

1. Press and hold the Menu button for three seconds to enter the hidden menu. Select ‘Factory

reset’.

2. Push the Tune dial within 3 seconds to conﬁrm the reset or the reset will cancel.

Secondary and inactive stations > Hints and tips > Technical Speciﬁcations

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Keine Kommentare

PURE Evoke Mio Bedienungshandbuch Seite 15