PURE Evoke Mio Bedienungshandbuch PDF herunterladen (Seite 14)

Energy saving

EVOKE Mio is part of the PURE EcoPlus product family, designed and manufactured to minimize

power consumption when the unit is switched on and to use less than 1 Watt in standby. One way

this low power consumption is enabled is by not collecting and storing Intellitext messages when

the unit is in standby. You can override this option by switching off energy saving mode, but this

will increase standby power consumption. Two options are available:

Energy saving On (the default setting)

Updates the Intellitext data when you tune to a station that broadcasts Intellitext. Intellitext data

is not collected in standby.

Energy saving Off

Collects Intellitext data in standby from the last station you tuned to with Intellitext, which

increases standby power consumption.

Note: When you have a ChargePAK E1 ﬁtted (see below) the radio will switch off when you press

the Standby button and not enter standby, as long as it is not connected to mains power.

Software Updates

Software updates for your EVOKE Mio may be made available in the future. If you register your

product and include a valid e-mail address you will receive notiﬁcation of software updates

(register at www.pure.com/register). Alternatively, visit http://support.pure.com at any time to

check for available software updates.

To update your software

Connect your radio to your PC using a suitable A-to-mini B type USB cable. Follow the instructions

provided with the software download at http://support.pure.com

Note: USB update requires a PC (not Mac) with internet access running Windows XP or higher,

and a suitable USB cable (not included).

Using a ChargePAK

™

ChargePAK E1 is an optional rechargeable battery pack which plugs into the socket in the radio’s

battery compartment. Whenever your radio is connected to a mains supply, the ChargePAK will

be charging and the power remaining will be available to view as a percentage in the Information

display options (see page 5).

To purchase a PURE ChargePAK E1, contact your nearest PURE dealer or visit the shop on our

website at www.pure.com.

Important: EVOKE Mio by can only be powered with a ChargePAK E1 and is not compatible with

any other batteries, either disposable or rechargeable, or any other ChargePAK model. Always

switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK.

Charge a new ChargePAK for 24 hours before ﬁrst using battery power.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 87 88

Keine Kommentare

PURE Evoke Mio Bedienungshandbuch Seite 14