PURE 18V Impact Driver Betriebsanleitung PDF herunterladen (Seite 8)

8

2. On/Off TRIGGER SWITCH

This tool is tted with a variable speed Trigger

Switch that delivers higher speed and torque

as the trigger pressure is increased. The

Trigger Switch is also tted with a brake

function which stops the chuck immediately

when you quickly release the trigger.

3. TRIGGER SWITCH LOCK

To lock the Trigger Switch in the ‘Off’

position, slide the Forward/Reverse

Selection Lever to its central position.

4. FORWARD/REVERSE SELECTION

For screw driving use the forward rotation

marked  on the Selection Lever. Push the

lever fully to the left.

For reverse rotation, necessary when

removing screws etc. push the Selection

Lever fully to the right, marked  on the

Selection Lever.

Only operate the Selection Lever when the

drill is at a complete stop.

5. CHUCK OPERATION

Note: This Impact Driver is equipped

with a keyless Collet chuck. This chuck is

optimized for use with single ended 50 mm x

6 mm AF impact quality bits/adaptors. Other

bits/adaptors may t, but may not locate

positively within the chuck. Only use impact

quality bits/adaptors with this machine.

a. To open the chuck pull the Collet sleeve

forwards and insert the desired bit or

adaptor into the chuck.

b. Release the Collet sleeve.

c. Pull the bit/adaptor forward slightly until

the Collet sleeve springs backwards and the

bit/adaptor is locked in place.

d. To release the bit/adaptor, pull the Collet

sleeve forwards and pull the bit/adaptor

from the chuck.

6. LOOSENING A SCREW

• Insert a suitable bit into the Collet chuck.

• Select reverse rotation by pushing the

Selection Lever fully to the right.

• Locate the bit into the screw.

• Push the bit forcefully into the screw.

• Operate the trigger switch.

• Allow the impacts to loosen and begin to

withdraw the screw.

• Adjust the speed of rotation for best

working efciency.

7. LOOSENING A NUT OR BOLT.

• Insert a suitable adaptor into the Collet

chuck.

• Select a suitable impact quality socket,

which is a good t over the nut/bolt head.

• Push the socket over the nut/bolt head.

• Operate the trigger switch.

• Allow the impacts to loosen and begin to

withdraw the nut or bolt.

• Adjust the speed of rotation for best

working efciency.

8. TIGHTENING

This impact driver is capable of delivering

substantial amounts of torque (turning

power). The operator must use due care and

diligence to ensure that fastenings are not

over-tightened and damaged.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare