4
5. Store idle tools. When not in use, tools
should be stored in a dry locked-up place,
out of reach of children.
6. Do not force the tool. It will do the job
better and safer at the rate for which it was
intended
7. Use the right tool. Do not force small
tools to do the job of a heavy duty tool. Do
not use tools for purposes not intended; for
example do not use circular saws to cut tree
limbs or logs.
8. Dress properly. Do not wear loose
clothing or jewellery, they can be caught
in moving parts. Non-skid footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
9. Use protective equipment. Use safety
glasses. Use face or dust mask if working
operations create dust.
10. Connect dust extraction equipment.
If the tool is provided for the connection of
dust extraction and collection equipment,
ensure these are connected and properly
used.
11. Do not abuse the cord. Never yank
the cord to disconnect it from the socket.
Keep the cord away from heat, oil and sharp
edges.
12. Secure work. Where possible, use
clamps or a vice to hold the work. It’s much
safer than using your hand.
13. Don’t over reach. Keep proper footing
and balance at all times.
14. Maintain tools with care. Keep
cutting tools sharp and clean for better
and safer performance. Follow instructions
for lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorised service facility. Inspect extension
cord periodically and replace immediately if
damaged. Keep handles dry, clean and free
from oil and grease.
15. Disconnect tools. When not in use,
before any servicing and when changing
accessories such as blades, bits, cutters,
disconnect tool from the power source
16. Remove adjusting keys and
spanners. Form the habit of checking to
see the keys and adjusting spanners are
removed from the tool before turning it on.
17. Avoid unintentional starting. Ensure
switch is in “off” position when plugging in.
18. Use outdoor extension leads.
When the tool is used outdoors, use only
extension cords intended for outdoor use
and so marked.
19. Stay alert. Watch what you are doing,
use common sense and do not operate the
tool when you are tired.
20. Check damaged parts. Before further
use of tool, it should be carefully checked
to determine that it will operate properly
and perform the intended function. Check
for alignment of moving parts, mountings
and any other components that may affect
its operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorised service centre
unless otherwise indicated in this instruction
manual. Have defective switches replaced
by an authorised service centre. Do not use
the tool if the switch does not turn it on and
off.
21. WARNING. The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22. Have your tool repaired by a qualied
person. This electric tool complies with
relevant safety rules. Repairs should only
be carried out by qualied persons using
original spare parts. Otherwise this may
result in considerable danger to the user.
HEALTH ADVICE
WARNING: When drilling, sanding, sawing
or grinding, dust particles will be produced.
In some instances, depending on the
materials you are working with, this dust can
be particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern