PURE M3700 Installationshandbuch PDF herunterladen (Seite 86)

Connecting Shelves

For a 3- or 4-shelf system, you need to install an optional BUS-M card and BUS-ME card(s) in the Basic Shelf.

To connect the shelves, plug the Bus Cables (supplied with the BUS-M card or BUS-ME card) into the slots

of the BUS-M card. Then, plug the other end of each Bus Cable into the BUS-S card built in to each Expansion

Shelf.

For details about the cards, refer to "3.5.1 BUS-M Card (KX-TDA6110)", "3.5.2 BUS-ME Card

(KX-TDA6111)", and "3.6.1 BUS-S Card".

Note

When installing or removing the BUS-M card, make sure that the DC power supply is turned off.

1. Mount 1 BUS-ME card (for a 3-shelf system), or 2 BUS-ME cards (for a 4-shelf system) on the BUS-M card

as shown below.

inside

BUS-M Card

Screw

BUS-ME Card

(for Expansion Shelf 3)

BUS-ME Card

(for Expansion Shelf 2)

2. Insert the BUS-M card along the guide rails in the BUS-M Card Slot (the right-most slot) of the Basic Shelf.

Guide Rail

86 Installation Manual Document Version 2009-12

3.2.6 Installation of 3- or 4-shelf System (Tower Type)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 127 128

Keine Kommentare

PURE M3700 Installationshandbuch Seite 86