Pure Highway Bedienungsanleitung PDF herunterladen (Seite 7)

1. Highway may automatically switch on when you connect the power cable to

your vehicle’s external power socket. If nothing happens make sure that there

is power available from the external power socket and press the [Tune] button

to switch the unit on.

2. Wait for Highway to perform an autotune for all available DAB stations, which

takes about a minute. The number of stations found is displayed.

3. Wait for Highway to search for a free FM frequency for transmitting DAB audio.

(If you have connected Highway to your car stereo’s line in input the FM scan

does not occur. Go to step 5.)

4. The screen shows the optimal free FM transmission frequency. Tune your car

radio to the FM frequency shown to hear the DAB station, e.g., 88.1MHz. If

your car radio has RDS enabled you will see ‘PURE DAB’ on the car radio’s

display.

5. After 30 seconds the DAB station screen appears, or you can rotate the

[Tune]

dial or press any button to see it sooner.

Tuning in

PURE Highway

PURE Highway 28

Searching... >

87.70MHz

radio to 88.1FM

Tune your car

04-02-2008

Classic FM

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Pure Highway Bedienungsanleitung Seite 7