Pure Highway Bedienungsanleitung PDF herunterladen (Seite 6)

Fitting instructions

1. Peel off the adhesive backing and attach the aerial to your windscreen. To optimise

reception, position the signal ampliﬁer (the black plastic case) and the dual aerial

wires 3 to 5cm away from the side of the windscreen and 1 to 2cm from the top.

» A.

2. If possible, tuck the aerial cable into the recess between your windscreen and the

passenger pillar or afﬁx it to your windscreen using the adhesive clips provided. Run

the aerial cable out of sight along the front of your dashboard.

» A

3. Next attach the windscreen mount. Clean the area you are attaching the suction cup

to with a dry cloth then peel off the transparent ﬁlm from the suction cup. Press the

suction cup ﬁrmly against the windscreen to form an airtight seal and push down the

catch to securely fasten the mount to the windscreen.

» B

4. Coil any excess cable around the cable tidy on the back of the mount and then insert

the aerial jack into the aerial input on the Highway unit (marked ).

» C

5. Press the Highway unit against the mount until the magnetic coupler holds it ﬁrmly in

place. » C

6. (Optional). If you want to connect Highway to your car radio’s line in input (if available)

connect a 3.5mm audio cable (not supplied) from the ‘LINE OUT’ socket on the

Highway unit to your car radio’s line in input.

7. Insert the power cable into the mini-USB socket on the side of the Highway unit and

then insert the adapter into your vehicle’s 12–24V (cigarette lighter) external power

socket.

» D

Note: the adhesive windscreen aerial is only suitable for one use and will not re-adhere

to the windscreen. You may wish to afﬁx the aerial using a temporary adhesive ﬁrst to test

the quality of reception before attaching the aerial permanently.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

Pure Highway Bedienungsanleitung Seite 6