Pure Highway H260DBi Bedienungsanleitung PDF herunterladen (Seite 16)

Digital radio options

DAB ANT

This function is used to specify the type of antenna

you are connecting to Highway. The available

options are ‘ACTIVE’ and ‘PASSIVE’. See page

20 for more information.

DAB LBND

You can use this function to specify whether or not

Highway can tune in to radio stations that broadcast

on L-band. Turn and press the VOLUME dial to

toggle the L-band function ‘ON’ or ‘OFF’.

Setup options

FM radio options

Local seeking

You can use the local seeking function so that

Highway only tunes into radio stations with a strong

signal.

To enable or disable the local seeking function:

1. Press and hold the DISP button on the front

panel until ‘CLOCK’ is displayed on the screen.

2. Use the button to scroll to ‘DX/LO’.

3. Turn and press the VOLUME dial to select either

‘LOCAL’ (enable) or ‘DX’ (disable).

Note: The number of radio stations that can be

received will decrease when local seeking function

is enabled.

Highway has a built-in Radio Data System (RDS)

decoder system that supports broadcast stations

transmitting RDS data.

RDS settings

AF function

The AF function switches to an alternative frequency

on the same network in order to maintain optimum

reception. This setting is ON by default.

1. Press and hold the DISP button on the front

panel until ‘CLOCK’ is displayed on the screen.

2. Press the or buttons to scroll to ‘AF’.

3. Turn the VOLUME dial to select ‘ON’ or ‘OFF’.

When the AF function is enabled, the AF indicator

will appear on the display.

REG (Regional programme) function

Radio Data System

When the REG function is ON, Highway will

automatically tune into the station with the strongest

signal within the speciﬁed region using the AF control.

If this function is OFF and the regional area changes

as you drive, Highway will tune into a station within

the current region. This setting is ON by default.

Notes:

•ThisfunctionisdisabledwhenHighwayistuned

into a national station, such as BBC R2.

•The REGfunction ON/OFFsettingonlyapplies

when the AF function is ON.

1. Press and hold the DISP button on the front panel

until ‘CLOCK’ is displayed on the screen.

2. Press the or buttons to scroll to ‘REG’.

3. Turn the VOLUME dial to select ON or OFF.

Manually tuning to a regional station in the

same network

You can manually tune to a regional station in the

same network when the AF function is ON and the

REG function is OFF.

Note: This function can be used when a regional

broadcast of the same network is received.

TA (Traffic Announcement)

In TA standby mode (‘TA’ icon is lit on the display),

Highway will wait for a TA signal from any available

FM station that is in range. When Highway receives

a TA or EON trafﬁc signal, Highway will automatically

tune into the FM station it has found with a trafﬁc

announcement. When the trafﬁc announcement has

ﬁnished, Highway will automatically tune back to the

last FM station you were listening to.

To disable TA mode, either during or outside an

active traffic announcement, press the TA button

once. This will switch TA mode off. To switch TA

mode back on, press the TA button again.

Setting the TA standby mode

Press the TA button to toggle the ‘TA’ icon on

and off. When the ‘TA’ icon is lit in the display.

Highway will remain in TA standby mode until a

traffic announcement is broadcast. When a traffic

announcement broadcast starts, ‘TRAF INF’ will

appear in the display.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Pure Highway H260DBi Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Pure Highway H260DBi