PURE 9010PS Bedienungshandbuch PDF herunterladen (Seite 20)

STEP 3 – Attach Safety Net Top

A. Lay the net loosely in between the poles and locate the edge with the clasped loops. This is the Safety Net’s

top. Position the Safety Net so that the opening is facing the desired side of the trampoline.

B. Open each clasp and guide the straps through the hole in a Pole Cap. Close the clasp, and ensure that it is

secure.

C. Once completely attached at the top, locate the ties at the bottom of the Safety Net.

D. Attach each elastic tie to the Trampoline Mat by placing it through a V-Ring in the mat and securely tying off

the elastic band.

IMPORTANT: The Safety Net may become tight as you near completion. It is recommended to have

another adult assist you in completing this process. The Safety Net should be tight but be careful not to pull too

hard from the netting or the bands themselves--try to direct most of the force from the stitched edges.

If you are experiencing an issue with attaching the net, untie any attached lower bands, and afx them in the

same manner that you attached the springs in; by alternately attaching bands directly across from each other.

IMPORTANT CHECK LIST AFTER COMPLETION OF ENCLOSURE ASSEMBLY

1. ENSURE THAT ALL LOWER ATTACHMENT BANDS ARE SECURE AND TIGHT

2. ENSURE THAT ALL UPPER ATTACHMENT CLASPS ARE SECURE AND TIGHT

3. ENSURE THAT ALL BOLTS AND NUTS ARE FASTENED SECURELY

4. ENSURE THAT THE SAFETY NET IS TAUT AND SECURED TIGHTLY (NO SAGGING)

THE SAFETY NET WILL NOT FUNCTION PROPERLY OTHERWISE

REMEMBER: SECURE THE NET ENTRANCE WHEN TRAMPOLINE IS IN USE!

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

PURE 9010PS Bedienungshandbuch Seite 20