PURE 9010PS Bedienungshandbuch Seite 19

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 27
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 18
Read the Safety Warning information on Page 5 before assembling or using your Enclosure.
STEP 1 – Attach Lower Poles to Trampoline
Note: Each Enclosure Pole requires 2x Screws, Spacers, and
Nut Assemblies to attach it to a Trampoline leg.
A. As shown in Diagrams on the right, place the Enclosure Pole against
the Trampoline leg, making sure to place the Spacers between each pole
and leg.
B. Insert each Screw through the plastic Spacers and the pole. MAKE
SURE that the Lower Screw is inserted through the pole on the Leg Base
and the Upper Screw is inserted through the hole on the Leg Extension
(refer to the section on assembling the trampoline if you need clarica-
tion).
C. Secure the Pole to the Trampoline Leg with 2x Nuts and Washers.
D. Once the assembly has been completed properly, the support poles
should resemble the diagram below.
STEP 2 – Attach Upper Poles
A. If not already attached, place a Pole
Cap on each Upper Pole. Locate the Push
Button on the poles and adjust the Pole
Cap so the opening faces outward.
B. Take each assembled Upper Pole and
place it atop the Lower Pole which was
attached to the trampoline.
C. Secure by snapping the pieces together.
Ensure that the metal push button that
secures the poles together is fully seated in
its corresponding hole.
IMPORTANT: Before proceeding, make sure that all of the Pole Caps have their openings facing outwards.
If any caps need to be adjusted, remove the Upper Pole and turn the cap to its proper position and redo
Steps B and C from Step 2.
Seitenansicht 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare