PURE 9010PS Bedienungshandbuch PDF herunterladen (Seite 14)

STEP 2 – TOP RAIL AND SUPPORT ASSEMBLY

1. Assemble each of the Leg Bases to the

Leg Extensions.

Using a bolt and washer for each connection, tightly

attach the screws. Set these assembled pieces aside.

Be careful when setting the assembled pieces aside

that you do not bend the Leg Extensions.

It is recommended that two people perform the

following steps.

2. Connect the Top Rail Sections.

Attach the Top Rail sections together forming a

large circle. You may have to push the ends of the

last joint slightly towards the “center” of the circle

to line the sections together. The second person

should hold the joint on the opposite side while

you bring the remaining section together to form

the circle. Make sure that each of the joints are

snug before continuing.

3. Assemble the Leg Bases.

Attach the assembled Leg Base sections from Step 1

to the completed Top Rail. The second person should

watch the joints in the top rail during this step to

prevent slippage of the frame. Tightly secure the Leg

Bases to the Top Rail with a bolt and washer at each

connection.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Keine Kommentare

PURE 9010PS Bedienungshandbuch Seite 14