PURE 8533HT Bedienungsanleitung PDF herunterladen (Seite 9)

ASSEMBLY INSTRUCTIONS

Step 1. Assemble Frame Pieces

Pictures in A,B & C show the Trainer unfolded for part

clarication. Assembly will be easier if the Home Train-

er is left in the storage (closed) position until Step D.

A. Place the Rear, short folding leg of the Main Frame

(12) into the Middle Pulley Bar (Curved Leg) (37).

Make sure the bolt holes in this leg are closest to the

bolt holes in the Middle Pulley Bar insert. Secure with

4x Allen Bolt M8 (56) and 4x Washers (55).

B. Place the front lower end (seat cushion without

logo) of the Main Frame (12) into the Lower Pulley

Bar (Bar with 2x large holes) (5). Make sure cord ends

on Lower Bar are facing out to same side as the seat

cushion. Secure with 4x Allen Bolt M8 (56) and 4x

Washers (55).

C. Place the Upper end of the Main Frame (12) into

the High Pulley Bar (Bar with 2x small holes) (22).

Secure with 4x Allen Bolt M8 (56) and 4x Washers

(55).

D. Unscrew the Locking Knob (18) on the side of the

Rear Leg. Keeping your foot securely on the Rear

Leg, slowly extend the front Leg forwards. Once the

Home Trainer is fully open, secure the Locking Knob.

Be careful when releasing tension that the

Knob is fully locked and the Trainer does not sud-

denly close.

E. Flip down the Seat Adjustment Bar (7) and insert

into the appropriate slot in the Main Frame (12).

F. Insert the Foot Plate (1) to the Low Pulley Bar (5).

Meijer.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

PURE 8533HT Bedienungsanleitung Seite 9