Pure Contour 200i Air Bedienungsanleitung PDF herunterladen (Seite 14)

Manually connecting Contour to your wireless network

Stage 1: Connecting your setup device to Contour

In the ﬁrst setup stage you need to establish a temporary connection between your

setup device and Contour. To do this, you need to create a temporary wireless

network to connect Contour to your iPod touch, iPhone, iPad or laptop.

Connecting using a temporary wireless network

1. Ensure that Contour is in Sleep mode or switched On.

2. Press the Wi-Fi Setup button on the back of the Contour for ﬁve seconds. This

will turn on Contour’s temporary wireless network. The Status LED will ﬂash red

while the temporary wireless network starts up.

20 secs

After around twenty seconds, the Status LED will then ﬂash green and blue.

20 secs

3. On your setup device (iPhone, iPod touch, iPad, laptop etc), the Contour

200i Air ****** wireless network should now be visible. Select this network. No

password is required.

4. Once you have connected to the Contour 200i Air ****** wireless network, you

can access the Contour Setup Manager on your setup device’s web browser.

Use Contour Setup Manager to add Contour to your own wireless network.

Note: ****** represents a six digit code that will be unique to each Contour,

which is based on the last six digits of Contour’s MAC address. The MAC

address can be found on the label on the base of Contour.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Keine Kommentare

Pure Contour 200i Air Bedienungsanleitung Seite 14